Quick Reference Guide

KVM Present Avocent iKVM
Switch
00.05.00.04 Ready
getled
Description Displays the LED settings on a module: blinking, not
blinking, or unknown (for empty slots).
To use this subcommand, you must have Login User
privilege.
Synopsis
racadm getled -m <module>
Input CMC only options:
-m < module > — Specifies the module whose LED settings
you want to view.
< module > can be one of the following:
• server-nx where n=1-8; x=a,b,c,d
• switch-n where n=1– 6
• chassis
• cmc-active
Output
Example For CMC:
• racadm getled -m server-10
< module > < LED state > server-10 Blinking
• racadm getled -m chassis
< module > < LED state > server-10 Not blinking
• racadm getled -m server-1
< module > < LED state > server-1 ON
• racadm getled -m server-9
< module > < LED state > server-9 Extension(1)
For iDRAC:
racadm getled
LED is blinking
getmacaddress
Description Displays the MAC/WWN addresses for all modules or for a specified module.
To use this subcommand, you must have CMC Login User privilege.
Synopsis
• racadm getmacaddress [-m < module >] [-t iscsi] [-x]
• racadm getmacaddress [-a]
Input
• -m < module > — Specifies the module whose MAC address you want to view.
< module > may be one of the following:
server-n where n =1–16
50