Quick Reference Guide

server-15 Not Present None None
server-16 Not Present None None
getflexaddr
Description Displays enabled/disabled status for the entire chassis. If
used with -i, the command displays MACs/WWN on a per
slot basis.
To use this subcommand, you must have CMC Login User
privilege.
NOTE: If FlexAddress is not activated on the chassis,
the command displays server-assigned MAC/WWN
addresses. If the slot is empty, the command leaves
the server-assigned MAC/WWN addresses blank. If
an external console controls the MAC/WWN
addresses, the command displays an externally
managed message.
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i < slotNum > — Specifies the slot information to be
displayed. < slotNum > can be from 1 to 16.
Output
Example
Example
Display current flex address settings for all slots and fabrics
racadm getflexaddr
<Slot#> <Status> <Server Presence>
1 Enabled Present
2 Enabled Present
3 Enabled Not Present
4 Enabled Not Present
5 Enabled Present
6 Enabled Not Present
7 Enabled Not Present
8 Enabled Not Present
9 Enabled Not Present
10 Enabled Extension(2)
45