Quick Reference Guide
• Use with -m <
module
> to specify for an individual server, or with -a for all
servers
Legal values: device=None, PXE, HDD, CD-DVD, vFDD, vCD-DVD, iSCSI, SD,
FDD, RFS
• -o <
no|yes
> — Indicates if the server should boot from the device once; must
be used with -o.
Use with -m <
module
> to specify for an individual server, or with -a for all
servers
• -a — Creates and enables an iDRAC root user if it does not already exist, and
is executed on all the existing servers in the chassis
• -u root — Indicates that the <
password
> is supplied for the root user on the
server. root is a constant parameter, the only value that is valid with the ‑u
option.
• -m <
module
> — Specifies the server you want to configure.
Legal values: server-
n
, where
n
=1–16
• -p <
password
> — Specifies the password for the root user on the server.
• -s <
ipaddress subnet gateway
> — Sets the IP address, subnet mask, and
gateway for the specified server, separated by single spaces.
– ipaddress — A string representing a valid IP address. For example,
192.168.0.20.
– subnet — A string representing a valid subnet mask. For example,
255.255.255.0.
– gateway — A string representing a valid gateway address. For
example, 192.168.0.1.
• -d — Enables DHCP for the specified server.
The -s and -d options cannot be used together in the same command.
• -6 — Enables IPv6 auto configuration (when used with -d.) Sets static IPv6
addresses (when used with -s)
Output None
Example
• racadm deploy -m server-8 -s 192.168.0.20 255.255.255.0 192.168.0.1
The server was deployed successfully.
The deploy command generates an error when used on the extension slot of
a multi-slot server.
• racadm deploy -m server-9 192.168.0.11 255.255.255.0 192.168.0.1
ERROR: Server in slot 9 is an extension of the server in slot 1.
• racadm deploy -m server-7 -u root -p calvin -s -6 ::/64 :: 10
feature
Description Displays all active chassis features. The information
displayed includes feature name, date activated, and the
serial number of the SD card used to activate the feature.
Dell Feature Cards may contain more than one feature.
After any feature included on a Dell Feature Card is
activated on a chassis, any other features that may be
included on that Dell Feature Card cannot be activated on
a different chassis.
34