Quick Reference Guide

To view the properties of this group, enable the vFlash using the command:
racadm config -g cfgvFlashSD -o cfgvFlashSDEnable 1
The following sections provide information about the objects in the cfgVFlashSD group.
cfgVFlashSDEnable (Read/Write)
Description Enables or disables the vFlash SD card.
NOTE: Disabling vFlashPartition by setting
cfgVFlashSDEnable to 0 does not require a license.
Legal Values
• 0 (Disable)
• 1 (Enable)
Default 1
cfgVFlashSDSize (Read Only)
Description Displays the size of the vFlash SD card in megabytes (MB).
Legal Values A string of upto 64 characters.
Default < card size >
cfgVFlashSDLicensed (Read Only)
Description Displays whether a SD card or vFlash SD card is inserted.
The vFlash SD card supports the new enhanced vFlash
features and the SD card supports only the limited vFlash
features.
Legal Values
• 0 (SD card is inserted)
• 1 (vFlash SD card is inserted)
Default None
cfgVFlashSDAvailableSize (Read Only)
Description Displays the available space (in MB) on the vFlash SD
card that can be used to create new partitions.
Legal Values A string of up to 64 characters.
Default If the card is not initialized, default is 0. If initialized,
displays the unused space on the card.
cfgVFlashSDHealth (Read Only)
Description
Displays the current health status of the vFlash SD card.
203