Quick Reference Guide

cfgIpmiSerialNewLineSequence (Read/Write)

Description Specifies the newline sequence specification for the IPMI

serial interface.

Legal Values

• 0 (None)

• 1 (CR-LF)

• 2 (NULL)

• 3 (<

• 4 (<

LF-CR

• 5 (<

Default 1

cfgIpmiSerialInputNewLineSequence (Read/Write)

Description Specifies the input newline sequence specification for the

IPMI serial interface.

Legal Values

• 1 (ENTER)

• 2 (NULL)

Default 1

cfgSmartCard

This group specifies properties used to support access to iDRAC using a smart card. This group is applicable only for

iDRAC.

The following sections provide information about the objects in the cfgSmartCard group.

cfgSmartCardLogonEnable (Read/Write)

Description Enables, disables, or enables with Remote RACADM

support for access to iDRAC using a smart card.

NOTE: Enabling with remote RACADM is only

applicable for iDRAC on Rack and Tower Servers.

Legal Values

• 0 (Disabled)

• 1 (Enabled)

• 2 (Enabled with Remote RACADM) - This is not

applicable for iDRAC Enterprise on Blade Servers.

Default 0

199