Quick Reference Guide

Legal Values
• 2 (User)
• 3 (Operator)
• 4 (Administrator)
Default 4
cfgIpmiSolAccumulateInterval (Read/Write)
Description Specifies the typical amount of time that iDRAC waits
before transmitting a partial SOL character data packet.
This value is 1-based 5ms increments.
Legal Values 1 – 255
Default 10
cfgIpmiSolSendThreshold (Read/Write)
Description Specifies the SOL threshold limit value and the maximum
number of bytes to buffer before sending an SOL data
packet.
Legal Values 1 – 255
Default 255
cfgIpmiLan
This group is applicable only for iDRAC and is used to configure the IPMI over LAN capabilities of the system.
The following sections provide information about the objects in the cfgIpmiLan group.
cfgIpmiLanEnable (Read/Write)
Description Enables or disables the IPMI over LAN interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgIpmiLanPrivLimit (Read/Write)
Description Specifies the maximum privilege level allowed for IPMI
over LAN access.
Legal Values
• 2 (User)
• 3 (Operator)
• 4 (Administrator)
Default 4
171