Quick Reference Guide

cfgChassisPowerCap=16685 W
cfgChassisPowerCapF=16685 W
cfgChassisPowerCapBTU=56931 BTU/hr
cfgChassisPowerCapFBTU=56931 BTU/hr
cfgChassisPowerCapPercent =100%
cfgChassisPowerCapFPercent =100%
cfgChassisRedundancyPolicy=0
cfgChassisDynamicPSUEngagementEnable=0
# cfgChassisInMaxPowerCapacity=0 W
# cfgChassisInRedundancyReserve=0 W
# cfgChassisInPowerServerAllocation=0 W
# cfgChassisInfrastructureInPowerAllocation=51 W
# cfgChassisTotalInPowerAvailable=0 W
# cfgChassisStandbyInPowerCapacity=0 W
# cfgChassisPowerClear=******** (Write-Only)
# cfgChassisPowerClearTimestamp=18:00:00 12/31/1969
cfgChassisPowerButtonEnable=1
cfgChassisAllow110VACOperation=0
cfgChassisMaxPowerConservationMode=0
cfgChassisPerformanceOverRedundancy=1
cfgSystemEnergyConsumptionClear = ****(Write-Only)
racadm config -g cfgChassisPower ‑o cfgChassisPowerClear
1
Clears cfgChassisMinPower and cfgChassisPeakPower.
cfgIpmiSol
This group is applicable only for iDRAC and is used to configure the Serial Over LAN (SOL) capabilities of the system.
The following sections provide information about the objects in the cfgIpmiSol group.
cfgIpmiSolEnable (Read/Write)
Description Enables or disables SOL.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 1
cfgIpmiSolBaudRate (Read/Write)
Description Specifies baud rate for serial communication over LAN.
Legal Values 9600, 19200, 57600, 115200
Default 115200
cfgIpmiSolMinPrivilege (Read/Write)
Description
Specifies the minimum privilege level required for SOL
access.
170