Quick Reference Guide

• 0 (FALSE)
Default 0
cfgVirMediaFloppyEmulation (Read/Write)
Description When set to 0, the virtual floppy drive is recognized as a
removable disk by Windows operating systems. Windows
operating systems assigns a drive letter that is C: or higher
during enumeration. When set to 1, the Virtual Floppy drive
is seen as a floppy drive by Windows operating systems.
Windows operating systems assigns a drive letter of A: or
B:.
NOTE: Virtual Media has to be reattached (using
cfgVirMediaAttached) for this change to take effect.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgSDWriteProtect (Read Only)
Description Displays if the physical write protect latch on the SD card
is enabled or disabled.
NOTE: This command is deprecated from iDRAC 1.5
and CMC 3.0 releases onwards. The functionality of
this command is now covered by
cfgVFlashSDWriteProtect. While execution of
the cfgSDWriteProtect command is successful,
it is recommended to use the
cfgVFlashSDWriteProtect command. For
more information, see "cfgVFlashSDWriteProtect" on
page 132.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default 0
cfgServerInfo
For iDRAC this group allows you to select the BIOS first boot device and provides the option to boot the selected device
only once.
For CMC, this group allows you to displays information for and configure a server in the chassis.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
144