Quick Reference Guide

NOTE: For information on using RACADM commands
for special characters, see Guidelines to Quote Strings
Containing Special Characters When Using RACADM
Commands.
cfgSerialConsoleIdleTimeout (Read/Write)
Description The maximum number of seconds to wait before an idle
serial session is disconnected.
Legal Values
• 0 = No timeout
• 60 – 1920
Default
• For iDRAC: 300
• For CMC: 1800
cfgSerialConsoleNoAuth (Read/Write)
Description Enables or disables the RAC or CMC serial console login
authentication.
Legal Values
• 0 (enables serial login authentication)
• 1 (disables serial login authentication)
Default 0
cfgSerialConsoleCommand (Read/Write)
Description Specifies a serial command that is executed after a user
logs into the serial console interface.
Legal Values
• For iDRAC: A string of up to 128 characters.
• For CMC: A string representing a valid serial
command. For example, connect server-1.
Default < blank >
cfgSerialConsoleColumns
Description Specifies the number of columns in the terminal window
command line connected to the serial port. You must log
out, then log in again for the changes to take effect.
This object property is applicable only for CMC.
NOTE: The prompt counts as two characters.
132