Quick Reference Guide

• For CMC: 115200
cfgSerialConsoleEnable (Read/Write)
Description Enables or disables the RAC or CMC serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
• For iDRAC: 0
• For CMC: 1
cfgSerialConsoleQuitKey (Read/Write)
Description For iDRAC:
This key or key combination terminates Virtual Console
text for iDRAC when using the console com2 command.
The cfgSerialConsoleQuitKey value can be represented by
one of the following:
• Decimal value — For example, 95
• Hexadecimal value — For example, 0x12
• Octal value — For example, 007
• ASCII value — For example, ^a
ASCII values may be represented using the
following Escape Key codes:
^ followed by any alphabet (a-z, A-Z) ^ followed by the
listed special characters: [ ] \ ^ _
For CMC:
This key specifies the character that aborts the serial text
console connect (or racadm connect) command.
NOTE: The CTRL key is represented by using the ^
(carat) character.
NOTE: The CTRL key does not generate a character by
itself, but must be struck simultaneously with another
key to generate a character.
For example, striking both the CTRL key and the \ key
simultaneously (rather than sequentially) is denoted as ^\.
Configuration options: The value must start with the ^
character, and be followed by one of the characters— a-
z, A-Z, [, ], \
Legal value: String of up to 4 characters
Default:
• For iDRAC: < Ctrl >< \ >
• For CMC: ^\
131