Owner's Manual

What’s New
These topics describe the new features.
1. Support for PowerEdge M620 and iDRAC7 servers.
2. Save and restore chassis configuration.
3. Improved SEL log.
4. Broadcom 57810-k Dual Port 10GB Blade Network Daughter Card.
5. Broadcom 57810-k Dual Port 10GB Blade Mezzanine Card.
6. Intel I350 Quad Port 1GB Blade Mezzanine Card.
7. Intel x520-k Dual Port 10GB Blade Network Daughter Card.
8. Intel x520-k Dual Port 10GB Blade Mezzanine Card.
9. Qlogic QMD8262-k Dual Port 10GB Blade Network Daughter Card.
10. Mellanox M4001Q QDR/DDR InfiniBand Switch.
11. Mellanox M4001F FDR InfiniBand Switch.
12. Mellanox ConnectX-3 QDR/DDR InfiniBand Blade Mezzanine Card.
13. Mellanox ConnectX-3 FDR InfiniBand Blade Mezzanine Card.
14. CMC MIB expansion to contain OIDs for Chassis Physical Location.
15. CMC MIB expansion to contain OIDs for Blade Server Service Tag and Slot name.
16. OpenManage Power Center enabled to manage server power.
17. One to many replication of BIOS server settings for iDRAC6 and iDRAC7 servers (Server Cloning).
18. Multi-Chassis Management feature enabled to synchronize properties of new member to those of
the leader.
19. Availability of CPU and Memory information from GUI for servers, which support the Lifecycle
Controller (LC).
20. Support for inventory of Servers and IOMs and report generation for an MCM (multi-chassis
management) group.
Prerequisites
Supported System
CMC version 4.0 is supported on the following Dell PowerEdge(TM) systems in the Dell PowerEdge M1000e
system enclosure:
• Dell PowerEdge M600
• Dell PowerEdge M605
• Dell PowerEdge M610
• Dell PowerEdge M610X
• Dell PowerEdge M620
• Dell PowerEdge M710
• Dell PowerEdge M710HD
• Dell PowerEdge M805
• Dell PowerEdge M905
• Dell PowerEdge M910
• Dell PowerEdge M915