Owner's Manual

60 Configuring CMC to Use Command Line Consoles
Using a Serial, Telnet, or SSH Console
When you connect to the CMC command line, you can enter these commands:
Using a Telnet Console With the CMC
Up to four Telnet client systems and four SSH clients may connect at any
given time.
If your management station is running Windows XP or Windows 2003, you
may experience an issue with the characters in a CMC Telnet session. This
issue may occur as a frozen login where the return key does not respond and
the password prompt does not appear.
To fix this issue, download hotfix 824810 from the Microsoft Support website
at support.microsoft.com. See Microsoft Knowledge Base article 824810 for
more information.
Table 3-1. CMC Command Line Commands
Command Description
racadm RACADM commands begin with the keyword racadm and are
followed by a subcommand, such as getconfig, serveraction, or
getsensorinfo. See "Using the RACADM Command Line Interface"
on page 73 for details on using RACADM.
connect Connects to the serial console of a server or I/O module.
See "Connecting to Servers or I/O Modules With the Connect
Command" on page 65 for help using the connect command.
NOTE: The racadm connect command can also be used.
exit, logout,
and quit
These commands all perform the same action: they end the current
session and return to a login prompt.