Owner's Manual

6 Contents
4 Using the RACADM Command Line
Interface . . . . . . . . . . . . . . . . . . . . . . . . . 73
Using a Serial, Telnet, or SSH Console . . . . . . . . . 73
Logging in to the CMC
. . . . . . . . . . . . . . . 74
Starting a Text Console . . . . . . . . . . . . . . . 74
Using RACADM. . . . . . . . . . . . . . . . . . . . . . 74
RACADM Subcommands
. . . . . . . . . . . . . . 75
Accessing RACADM Remotely . . . . . . . . . . . 79
Enabling and Disabling the RACADM
Remote Capability
. . . . . . . . . . . . . . . . . . 80
Using RACADM Remotely. . . . . . . . . . . . . . 80
RACADM Error Messages
. . . . . . . . . . . . . 81
Using RACADM to Configure the CMC
. . . . . . . . . . 81
Configuring CMC Network Properties. . . . . . . . . . 81
Setting Up Initial Access to the CMC
. . . . . . . . 82
Viewing Current Network Settings . . . . . . . . . 83
Configuring the Network LAN Settings
. . . . . . . 83
Configuring the Network Security
Settings (IPv4 Only) . . . . . . . . . . . . . . . . . 90
Using RACADM to Configure Users
. . . . . . . . . . . 91
Adding a CMC User
. . . . . . . . . . . . . . . . . 92
Using RACADM to Configure Public Key
Authentication over SSH
. . . . . . . . . . . . . . . . . 93
Generating Public Keys for Windows
. . . . . . . . 94
Generating Public Keys for Linux
. . . . . . . . . . 95
RACADM Syntax Notes for CMC
. . . . . . . . . . 95
Viewing the Public Keys
. . . . . . . . . . . . . . 95
Adding the Public Keys
. . . . . . . . . . . . . . . 96
Deleting the Public Keys
. . . . . . . . . . . . . . 96
Logging in Using Public Key Authentication
. . . . 96