Owner's Manual

474 Diagnostics
Firmware Version Only displays on an active CMC. Displays Standby for the
standby CMC.
IP4 <enabled,
disabled>
Displays current IPv4 enabled state only on an active CMC.
IP4 Address:
<address,
acquiring>
Only displays if IPv4 is enabled only on an active CMC.
IP6 <enabled,
disabled>
Displays current IPv6 enabled state only on an active CMC.
IP6 Local Address:
<address>
Only displays if IPv6 is enabled only on an active CMC.
IP6 Global Address:
<address>
Only displays if IPv6 is enabled only on an active CMC.
Table 13-11. Chassis/Enclosure Status
Item Description
User Define Name Example: “Dell Rack System”. This is settable via CMC CLI
or Web GUI.
Error Messages If no errors occur then No Errors is displayed; otherwise
error messages are listed, critical errors first, then warnings.
Model Number Example "PowerEdgeM1000".
Power Consumption Current power consumption in watts.
Peak Power Peak power consumed in watts.
Minimum Power Minimum power consumed in watts.
Ambient Temperature Current ambient temperature in degrees Celsius.
Service Tag The factory-assigned service tag.
CMC redundancy
mode
Non-Redundant or Redundant.
PSU redundancy mode Non-Redundant, AC Redundant, or DC Redundant.
Table 13-10. CMC Status
(continued)
Item Description