Owner's Manual

Troubleshooting and Recovery 455
To restore the Chassis configuration:
1
On the Chassis Backup screen, click Browse .
2 Type or navigate to the backup file, then click Open to select it.
3 Click Restore .
NOTE: CMC does not reset upon restoring configuration, however CMC services
may take some time to effectively impose any changed/new configuration. After
successful completion, all current sessions are closed.
Troubleshooting Alerting
Use the CMC log and the trace log to troubleshoot CMC alerts. The success
or failure of each e-mail and/or SNMP trap delivery attempt is logged into the
CMC log. Additional information describing the particular error is logged in
the trace log. However, since SNMP does not confirm delivery of traps, use a
network analyzer or a tool such as Microsoft’s snmputil to trace the packets
on the managed system.
You can configure SNMP alerts using the Web interface. For information, see
"Configuring SNMP Alerts."