Owner's Manual

Troubleshooting and Recovery 435
• Grayed Out - indicates that the component is present and not
powered on. It is not communicating with CMC and there is no
indication of an adverse condition.
All components display a corresponding text hint or screen tip when the
mouse is placed over the component subgraphic. Component status is
dynamically updated, and the component subgraphic colors and text hints
are automatically changed to reflect the current state.
Clicking on the component subgraphic selects that component's
information and Quick Links for display below the chassis graphics.
The CMC Hardware Log section provides the latest 10 entries of the
CMC Hardware Log for reference.
Using RACADM
Open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm getmodinfo
Viewing the Event Logs
The Hardware Log and CMC Log pages display system-critical events that
occur on the managed system.
Viewing the Hardware Log
CMC generates a hardware log of events that occur on the chassis. You can
view the hardware log using the Web interface and remote RACADM.
NOTE: To clear the hardware log, you must have Clear Logs Administrator
privilege.
NOTE: You can configure CMC to send e-mail or SNMP traps when specific events
occur. For information on configuring CMC to send alerts, see "Configuring SNMP
Alerts" on page 414 and "Configuring E-mail Alerts" on page 421.