Owner's Manual

434 Troubleshooting and Recovery
Using RACADM
1 Open a serial/Telnet/SSH text console to CMC and log in.
2 To view chassis and CMC summaries, type:
racadm getsysinfo
3
To view the iKVM summary, type:
racadm getkvminfo
4
To view the IOM summary, type:
racadm getioinfo
Viewing Chassis and Component Health Status
Using the Web Interface
To view chassis and component health summaries:
1
Log in to the CMC Web interface.
2 Select Chassis in the system tree. The Chassis Health page displays.
The Chassis Graphics section provides a graphical view of the front and
rear of the chassis. This graphical representation provides a visual
overview of the components installed within the chassis and its
corresponding status.
Each graphic displays a real-time representation of the installed
components. The component state is indicated by the overlay of the
component subgraphic.
• No overlay - the component is present, powered on and
communicating with CMC; there is no indication of an adverse
condition.
• Amber caution sign - indicates that only warning alerts have been
issued and that corrective action must be taken.
• Red X - indicates at least one failure condition is present. This means
that CMC can still communicate with the component and that the
health status is reported as critical.