Owner's Manual

Troubleshooting and Recovery 429
Managing Lifecycle Controller jobs on a remote
system
The Lifecycle Controller service is available on each of the servers and is
facilitated by iDRAC. CMC provides a listing of all Lifecycle Controller jobs
on the server(s) and enables you to delete or purge existing jobs using the web
interface. For information on enabling the Lifecycle Controller, see "Updating
Server Component Firmware Using Lifecycle Controller" on page 212.
The Lifecycle Controller jobs list is a static list of the existing jobs on the
server and must be refreshed for the most up-to-date list and status of jobs on
the server.
Table 12-4 describes the information displayed in the Lifecycle Controller
jobs list.
The Lifecycle Controller Jobs page enables you delete or purge existing jobs
on the server.
Table 12-4. Lifecycle Controller Jobs Status
Event Filter Mask Value
Slot Displays the slot occupied by the server in the chassis. Slot
numbers are sequential IDs, from 1 to 16 (for the 16 available
slots in the chassis), that help identify the location of the
server in the chassis. When there are less than 16 servers
occupying slots, only those slots populated by servers are
displayed.
Name Displays the name of the server in each slot.
Model Displays the model of the server.
Job Id Number assigned by the Lifecycle Controller service for a
particular job.
Description Phrase indicating the type of job on the server such as an
Update job, Reboot job, and so on.
Status Indicates the status of the job on the server.