Owner's Manual

Troubleshooting and Recovery 425
Monitoring Power and Executing Power Control
Commands on the Chassis
You can use the Web interface or RACADM to:
• View the system’s current power status.
• Perform an orderly shutdown through the operating system when
rebooting, and power the system on or off.
For information about power management on CMC and configuring power
budget, redundancy, and power control, see "Power Management" on
page 317.
Viewing Power Budget Status
For instructions on viewing power budget status for the chassis, servers,
and PSUs using either the Web interface or RACADM, see "Viewing Power
Consumption Status" on page 340.
Executing a Power Control Operation
For instructions on powering on, powering off, resetting, or power-cycling the
system using the CMC Web interface or RACADM, see "Executing Power
Control Operations on the Chassis" on page 358, "Executing Power Control
Operations on an IOM" on page 359, and "Executing Power Control
Operations on a Server" on page 360.