Owner's Manual

Troubleshooting and Recovery 417
To add and configure SNMP alerts using the CMC Web interface:
1
Log in to the CMC Web interface.
2 Select Chassis in the system tree.
3 Click the Alerts tab. The Chassis Events page appears.
4 Enable alerting:
a Select the check boxes of the events for which you want to enable
alerting. To enable all events for alerting, select the
Select All check
box.
b Click Apply to save your settings.
5 Click the Traps Settings subtab.The Chassis Event Alert Destinations
page displays.
6 Type a valid address in an empty Destination field.
NOTE: A valid address is an address that receives the trap alerts. Use the
"quad-dot" IPv4 format, standard IPv6 address notation, or FQDN. For example:
123.123.123.123 or 2001:db8:85a3::8a2e:370:7334 or dell.com
7 Type t h e SNMP Community String to which the destination
management station belongs.
NOTE: The community string on the Chassis Event Alert Destinations page
differs from the community string on the Chassis Network Services page.
The SNMP traps community string is the community that CMC uses for
outbound traps destined to management stations. The community string on
the Chassis Network Services page is the community string that
management stations use to query the SNMP daemon on CMC.
8 Click Apply to save your changes.