Owner's Manual

Using the iKVM Module 387
Managing iKVM From CMC
Enabling or Disabling the Front Panel
To enable or disable access to the iKVM from the front panel using
RACADM, open a serial/Telnet/SSH text console to CMC, log in, and type:
racadm config -g cfgKVMInfo -o cfgKVMFrontPanelEnable
<value>
where <value> is 1 (enable) or 0 (disable).
For more information about the config subcommand, see the config
command section in the RACADM Command Line Reference Guide for
iDRAC6 and CMC.
To enable or disable access to the iKVM from the front panel using
the Web interface:
1
Log in to the CMC Web interface.
2 Select iKVM in the system tree. The iKVM Status page displays.
3 Click the Setup tab. The iKVM Configuration page displays.
4 To enable, select the Front Panel USB/Video Enabled check box.
To disable, clear the
Front Panel USB/Video Enabled check box.
5 Click Apply to save the setting.