Owner's Manual

Using the iKVM Module 379
Accessing the Security Dialog Box
To access the Security dialog box:
1
Press <Print Screen>. The Main dialog box appears.
2 Click Setup and the Security . The Security dialog box appears.
Setting or Changing the Password
To set or change the password:
1
Single-click and press <Enter> or double-click in the New field.
2 Type the new password in the New field and then press <Enter>.
Passwords are case sensitive and require 5–12 characters. They must
include at least one letter and one number. Legal characters are: A–Z, a–z,
0–9, space, and hyphen.
3 In the Repeat field, type the password again, and then press <Enter>.
4 Click OK if you only want to change your password, and then close the
dialog box.
Password-protecting Your Console
To password-protect your console:
1
Set your password as described in the previous procedure.
2 Select the Enable Screen Saver box.
3 Type the number of minutes of Inactivity Time (from 1 through 99) to
delay password protection and screen saver activation.