Owner's Manual

152 Using the CMC Web Interface
Table 5-36. Temperature Sensors Health Status Information
Item Description
ID Displays the location of the temperature probe.
Name Displays the name of each temperature probe for the chassis and
servers.
Present Indicates whether the module is present (Yes) or absent (No) in the
chassis.
Health OK Indicates that the module is present and
communicating with CMC. In the event of a
communication failure between CMC and the
server, CMC cannot obtain or display the
health status for the server.
Warning Indicates that only warning alerts have been
issued, and corrective action must be taken. If
corrective actions are not taken, then critical or
severe failures that can affect the integrity of
the module may occur.
Severe Indicates that one failure alert has been issued.
Severe status represents a system failure on the
module and corrective action must be taken
immediately.
Unknown Indicates that communication with the
module has not been established. This is
usually because the chassis is off or the chassis
has not completed initialization.
Reading Displays the current temperature in degrees Centigrade and
Fahrenheit.
Threshold
Maximum
Displays the highest temperature, in degrees Centigrade and
Fahrenheit, at which a Failure alert is issued.