Owner's Manual

Using the CMC Web Interface 151
Viewing Status of the Temperature Sensors
The Temperature Sensors Status page displays the status and readings of the
temperature probes on the entire chassis (chassis and servers).
NOTE: The temperature probes value cannot be edited. Any change beyond the
threshold generates an alert that causes the fan speed to vary. For example, if the
CMC ambient temperature probe exceeds threshold, the speed of the fans on the
chassis increases.
To view the health status of the temperature probes:
1
Log in to the CMC Web interface.
2 Select Temperature Sensors in the system tree.
The
Temperature Sensors Status page is displayed.
Power Status Indicates the power state of the PSU: Online,
Off, or Slot Empty.
Capacity Displays the power capacity in watts.
Table 5-35. System Power Status
Item Description
Overall Power
Health
Displays the health status (OK, Non-Critical, Critical, Non-
Recoverable, Other, Unknown) of the power management for
the entire chassis.
System Power
Status
Displays the power status (On, Off, Powering On, Powering
Off) of the chassis.
Redundancy Displays the power supply redundancy status. Values include:
No: Power Supplies are not redundant.
Yes: Full Redundancy in effect.
Table 5-34. Power Supply Health Status Information
(continued)
Item Description