Owner's Manual

144 Using the CMC Web Interface
For information on how to launch the iDRAC management console and
single sign-on policies, see "Launching iDRAC using Single Sign-On" on
page 230.
Table 5-32. Individual Server Status - WWN/MAC Address
Item Description
Slot Displays the slot(s) occupied by the server on the chassis.
Location Displays the location occupied by the Input/Output modules.
The six locations are identified by a combination of the group
name (A, B, or C) and slot number (1 or 2). Location names are:
A1, A2, B1, B2, C1, or C2.
Fabric Displays the type of the I/O fabric.
Server-Assigned Displays the server-assigned WWN/MAC addresses embedded in
the controller's hardware. WWN/MAC addresses showing N/A
indicate that an interface for the specified fabric is not installed.
Chassis-
Assigned
Displays the chassis-assigned WWN/MAC addresses used for the
particular slot. WWN/MAC addresses showing N/A indicate that
the FlexAddress feature is not installed.
NOTE: A green check mark in the Server-Assigned and
Chassis-Assigned columns indicates the type of active addresses.
NOTE: When FlexAddress is enabled, slots without servers installed
display the Chassis-Assigned MAC/WWN assignment for the
embedded Ethernet controllers (Fabric A). The Chassis-Assigned
addresses for fabrics B and C display N/A, unless these fabrics are in
use on servers in populated slots; it is assumed that the same fabric
types are deployed in the unpopulated slots.