Owner's Manual

Using the CMC Web Interface 117
Disbanding a Chassis Group
To disband a chassis group from the lead chassis:
1
Login with administrator privileges to the leader chassis.
2 Select the Lead chassis in the tree.
3 Click Setup  Group Administration .
4 In the Chassis Group page, under Role , select None, and then click Apply .
The lead chassis then communicates to all the members that they have been
removed from the group. Finally the lead chassis discontinues its role. It can
now be assigned as a member or a leader of another group.
The member chassis may not receive the message, if a network issue prevents
contact between the leader and the member. In this case, disable the member
from the member chassis to complete the removal. For more information, see
the sub-section "Disabling an Individual Member at the Member Chassis" on
page 117.
Disabling an Individual Member at the Member Chassis
Sometimes a member cannot be removed from a group by the lead chassis.
This can happen if network connectivity to the member is lost. To remove a
member from a group at the member chassis:
1
Login with chassis administrator privileges to the member chassis.
2 Click Setup  Group Administration .
3 Select None, and then click Apply .