Owner's Manual

Using the CMC Web Interface 111
You can log in as either a CMC user or as a Directory user.
To log in:
1
In the Username field, type your user name:
• CMC user name:
<user name>
• Active Directory user name: <domain>\<user name> ,
<domain>/<user name> or <user>@<domain> .
• LDAP user name: <
user name >
NOTE: This field is case sensitive.
2 In the Password field, type your CMC user password or Active Directory
user password.
NOTE: This field is case-sensitive.
3 Optionally, select a session timeout. This is the amount of time you can
stay logged in with no activity before you are automatically logged out. The
default value is the Web Service Idle Timeout. See Configuring Services
for more details.
4 Click OK or press <Enter>.
Logging Out
When you are logged in to the Web interface, you can log out at any time by
clicking Logout in the upper right corner of any page.
NOTE: Be careful to apply (save) any settings or information you enter on a page.
If you log out or navigate away from that page without applying your changes, the
changes are lost.
Configuring Basic CMC Settings
The following sections provide information on how to configure the basic
CMC settings.
Setting the Chassis Physical Location and Chassis Name
You can set the chassis location in a data center and the chassis name to
identify the chassis on the network (the default name is "Dell Rack System.")
For example, an SNMP query on the chassis name returns the name you
configure.