Users Guide

1. In the MMC Console Root window, right-click a container.
2. Select New > Dell Remote Management Object Advanced.
3. On the New Object page, type a name for the new object.
4. Select Privilege Object and click OK.
5. Right-click the privilege object that you created, and then select Properties.
6. Click the RAC Privileges tab and assign the privileges for the user or group. For more information about CMC user privileges, see
Types of Users.
Creating Association Object
The Association Object is derived from a Group and must contain a Group Type. The Association Scope specifies the Security Group Type
for the Association Object. When you create an Association Object, choose the Association Scope that applies to the type of objects you
intend to add. For example, if you select Universal, the association objects are only available when the Active Directory Domain is
functioning in Native Mode or above.
To create association object:
1. In the Console Root (MMC) window, right-click a container.
2. Select New > Dell Remote Management Object Advanced.
3. On the New Object page, type a name for the new object and select Association Object.
4. Select the scope for the Association Object and click OK.
Adding Objects To Association Object
Using the Association Object Properties window, you can associate users or user groups, privilege objects, and RAC devices or RAC
device groups. If your system is running on Microsoft Windows 2000 operating system or later version, use Universal Groups to span
domains with your user or RAC objects.
You can add groups of Users and RAC devices.
Adding Users Or User Groups
To add users or user groups:
1. Right-click the Association Object and select Properties.
2. Select the Users tab and click Add.
3. Enter the user or user group name and click OK.
Adding Privileges
To add privileges:
1. Select the Privileges Object tab and click Add.
2. Enter the privilege object name and click OK.
Click the Privilege Object tab to add the privilege object to the association that defines the user’s or user group’s privileges when
authenticating to an RAC device. Only one privilege object can be added to an Association Object.
Adding RAC Devices Or RAC Device Groups
To add RAC devices or RAC device groups:
1. Select the Products tab and click Add.
2. Enter RAC devices or RAC device group name and click OK.
3. In the Properties window, click Apply and click OK.
Click the Products tab to add one or more RAC devices to the association. The associated devices specify the RAC devices
connected to the network that are available for the defined users or user groups. Multiple RAC devices can be added to an Association
Object.
Configuring Active Directory With Extended Schema Using CMC Web
Interface
To configure Active Directory with extended schema using CMC web interface:
NOTE: For information about the various fields, see the
Online Help .
1. In the left pane, click, Chassis Overview > User Authentication > Chassis Overview > Directory Services.
Configuring User Accounts and Privileges
129