Release Notes

• Configuring CMC using WSMan for the following SNMPv3 user attributes:

○ userAdminSNMPv3Enable

○ userAdminSNMPv3AuthenticationType

○ userAdminSNMPv3PrivacyType

• Monitoring CMC using WSMan for the following sensors:

○ Fan sensor speed

○ Temperature sensor for chassis and servers

• Providing racadm commands to initiate/cancel consistency checks of all VDs:

○ Raid ccheckall

○ Raid cancelcheckall

Release 2.23

• Federal Information Processing Standards (FIPS) certified. Certification Number: #2861. For details, see www.csrc.nist.gov/

groups/STM/cmvp/documents/140-1/140val-all.htm#2861

Release 2.22

• Updated the OpenSSL open-source package to version 1.0.2j.

Release 2.20

• Federal Information Processing Standards (FIPS) 140-2 cryptography capability.

• Disabling AC Power Recovery.

• Creating a Virtual Disk without initialization of the virtual disk.

• Pre-enablement of the following features for Self-Encrypting Drives (SEDs):

○ Creating, modifying, and deleting the security key — using key identifier and passphrase

○ Secure erase

○ Encrypting virtual disks

○ Unlocking and importing secure foreign virtual disk configuration using RACADM and WSMan

• Querying shared storage health using SNMP.

• Enabling sPERC Redundancy and setting up Multiple Assignment Mode using WSMan.

• Performing racresetcfg from CMC GUI.

• Updating the OpenSSL open-source package to version 1.0.2f.

• Updating the OpenSSH open-source package to version 7.1p1.

• Updating glibc to version 2.23 to address new security vulnerabilities.

• TLS 1.2 and TLS 1.1 by default.

• User configuration option to enable TLS 1.0 using RACADM.

• SNMPv3 configuration only in RACADM.

• Querying the health status of the chassis components using WSMan.

• Initiating Quick Deploy of blade through RACADM.

• Configuring CMC using WSMan for the following features:

○ Host Name of Chassis

○ IP Configuration

○ DNS

○ DNS Registration

○ NTP

○ Change Default Password

• Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.

• Populating CMC Device name correctly in the inventory.

Release 2.12

• Quick link to the Dell Tech Center page from the CMC web GUI.

What is new