Release Notes

Known Issues

Topics:

• Flex address disabled after racresetcfg of CMC

• RAID-related operations might take longer to report status

• Error occurs while importing CMC configuration file

• Chassis overview health tab does not display alert

• Server components update page gets corrupt

• Controller failover feature does not work

• Active alert for degraded virtual disk is not displayed

• SPERC information is displayed partially on LCD display

• Unable to view chassis logs from remote RACADM

• Static IPv6 IP address can be assigned to iDRAC blades

Flex address disabled after racresetcfg of CMC

Description XWKGY_Intel10G card shows Flex address disabled after racresetcfg of CMC in Network Device page and

OS.

Resolution Virtual reseat or physical reseat of the server

Versions/Systems

affected

All CMC versions including CMC 3.20 for Dell PowerEdge VRTX and PowerEdge servers with iDRAC7 or earlier.

RAID-related operations might take longer to

report status

Description

After Shared PERC8 controller update, RAID-related operations may take longer to report status.

Resolution Wait for the operation status to report.

Versions/Systems

affected

CMC version 2.01 or later for Dell PowerEdge VRTX.

Error occurs while importing CMC configuration

file

Description

An error occurs while importing CMC configuration file using local or remote RACADM.

Resolution This issue occurs when IPv6 is enabled or disabled from the configuration file. Enable or disable IPv6 using the

command, racadm config -g cfgIPv6LanNetworking -o cfgIPv6Enable 0.

Versions/Systems

affected

CMC Version 2.0 or later for Dell PowerEdge VRTX

Chassis overview health tab does not display alert

Description

At times when foreign drives are inserted, the Chassis Overview Health tab does not display the alert, “Foreign

Configuration was detected on Physical Disk”.

14 Known Issues