CLI Guide

Table 102. Details of init (continued)

Example

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed fast

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed full

raid

Table 103. Details of raid

Description Monitors, retrieves inventory, and configures the storage components connected to the chassis.

NOTE: To use this subcommand, you must have the Chassis Administrator privilege.

Synopsis

racadm raid get status

racadm raid get <Object type>

racadm raid get <Object type> -o

racadm raid get <Object type> -o -p <property names separated by comma>

racadm raid get <Object type>:<FQDD's of Object type separated by comma>

racadm raid set <Set Operation>:<FQDD of Object type>

racadm raid set <Set Operation> -pdkey:<FQDD of PD>

racadm raid set <Set Operation> -vdkey:<FQDD of VD>

Input

NOTE:

• Maximum property names that can be specified in –p option is 10.

• Maximum FQDDs that can be specified is 3.

• (Object type) — controllers, vdisks, pdisks.

• Set Operation

○ resetconfig

○ exportlog

○ forceonline

○ deletevd

○ blink

○ unblink

○ clearconfig

○ importconfig

○ ccheck

○ cancelcheck

○ patrolread

○ hotspare

○ init

○ assignva

○ createvd

• –o — Displays all the properties of the selected Key or Object.

• –p — Displays the property names with filter.

• FQDD — Displays all the properties of the FQDD's Key.

RACADM Subcommand Details