CLI Guide

cancelinit
Table 98. Details of cancelinit
Description
Stops an initialization operation on the specified virtual drive.
Synopsis
racadm raid cancelinit:<VD FQDD> {-current | -pending}
Input
• –current <optional>: Immediately performs the configuration operation.
NOTE: If this requires the system to restart, the system will be restarted.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending
and –current flags on multiple commands to reduce the possible number of system rerestartts.
Example
racadm raid cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.1-1
cancelrebuild
Table 99. Details of cancelrebuild
Description
Stops a rebuild on a specified physical disk drive.
Synopsis
racadm raid cancelrebuild:<PD FQDD> {-current | -pending}
Input
• –current <optional>: Performs the configuration right now.
NOTE: If this requires the system to restart, the system is restarted.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending
and –current flags on multiple commands to reduce the possible number of system rerestarts.
Example
racadm raid
cancelrebuild:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1
assignva
Table 100. Details of assignva
Description Assigns a virtual disk to one or more virtual adapters.
NOTE: You can assign virtual disk to multiple virtual adapters when you select the mode of
assignment as multiple.
NOTE: You can assign a virtual disk to multiple virtual adapters from CMC CLI even when the
Assignment Mode is set to Single Assignment in the CMC web interface.
Synopsis
racadm raid assignva:<VA FQDD> -vdkey:<VD FQDD> -accesspolicy {na | rw} -
assignpolicy {single | multiple}{-current | -pending}
Input
• –current <optional>: Performs the configuration right now.
NOTE: If this requires the system to reboot, the system reboots then.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending
and –current flags on multiple commands to reduce the possible number of system restarts.
• –assignpolicy {single|multiple}: Uses the specified assign policy to determine if the virtual disk can be assigned
to multiple virtual adapters.
RACADM Subcommand Details 91