Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.30 For Dell PowerEdge VRTX
71727374757677787980
This command displays all fan keys connected to the enclosures referred as refkeys.
racadm raid get fans --refkey <enclosure/Controllers FQDDs separated
by comma > -o optimized version.
This command displays all fan objects for the enclosure FQDD.
racadm raid get fans --refkey <enclosure/Controllers FQDDs separated
by comma > -o -p <property names separated by comma> optimized and
filtered version.
• Monitor and Inventory all EMMs connected to the enclosure
racadm raid get emms --refkey <enclosure/Controllers FQDDs separated
by comma>
This command returns all EMM keys connected to the enclosures being mentioned as refkeys.
racadm raid get emms --refkey <enclosure/Controllers FQDDs separated
by comma > -o
This command is an optimized version and displays all EMM objects for the enclosure FQDD.
racadm raid get emms --refkey <enclosure/Controllers FQDDs separated
by comma > -o -p <property names separated by comma>
This command is an optimized and filtered version.
• Monitor and Inventory all Temperature Probes connected to the enclosure
racadm raid get tempprobes --refkey <enclosure/Controllers FQDDs
separated by comma>
This command displays all temperature probe keys connected to the enclosures being mentioned as refkeys.
racadm raid get tempprobes --refkey <enclosure/Controllers FQDDs
separated by comma > -o
This command is an optimized version and displays all temperature probe objects for the enclosure FQDD.
racadm raid get tempprobes --refkey <enclosure FQDDs
separated by comma > -o -p <property names separated by comma>
optimized and filtered version
• Monitor and Inventory all Power Supply Units connected to the enclosure
racadm raid get psus --refkey <enclosure/Controllers FQDDs separated
by comma>
This command displays all power supply units connected to the enclosures being mentioned as refkeys.
racadm raid get psus --refkey <enclosure/Controllers FQDDs separated
by comma > -o
This command is an optimized version and displays all power supply units objects for the enclosure FQDD.
racadm raid get psus --refkey <enclosure/Controllers FQDD's separated
by comma > -o -p <property names separated by comma>
This command is an optimized and filtered version.
blink
Table 85. Details of blink
Description
Starts blinking or identifies operation on the specified device.
RACADM Subcommand Details 79