CLI Guide

Table 83. Details of racresetpcie (continued)

• To use this subcommand for CMC, you must have the Chassis Administrator

privilege.

• This command cannot run successfully, if any blade server is powered on.

Synopsis

racadm racresetpcie

raid

Table 84. Details of raid

Description Allows you to execute commands to control RAID arrays.

Synopsis

racadm raid

Example

• Monitor Health of Storage root node.

racadm raid get status

Storage Root Node Status : Ok

This command retrieves the controllers keys (FQDDs).

• Monitor and Inventory all Controllers connected to the server.

racadm raid get controllers

racadm raid get controllers -o

This command is an optimized version and displays the full controller objects along with their keys.

racadm raid get controllers -o -p <property names separated by comma>

This command displays the filtered property values for all returned controller objects.

• Monitor and Inventory all batteries connected to the controller

racadm raid get batteries --refkey <controller FQDDs

separated by comma>

This command displays all battery keys connected to the controllers referred to as refkeys.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o

This command is an optimized version and displays all battery objects for the controller FQDD.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o -p <property names separated by comma>

This command is an optimized and filtered version.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o -p <property names separated by comma>

• Monitor and Inventory all virtual disks connected to the controller

racadm raid get vdisks --refkey <controller FQDDs

separated by comma>

RACADM Subcommand Details