CLI Guide
100.101.22.0 0.0.0.0 255.255.255.0 U 0 0 0
eth0
ping
Table 78. Details of ping
Description Verifies that the destination IP4address is reachable from iDRAC with the current routing-table
contents. A destination IP4address is required. An ICMP echo packet is sent to the destination IP
address based on the current routing-table contents.
To use this subcommand for CMC, you must have the Administrator privilege for CMC, and for
iDRAC you must have the Execute Diagnostic Commands privilege.
Synopsis
racadm ping <ip4address>
ping6
Table 79. Details of ping6
Description Verifies that the destination IPv6 address is reachable from an
iDRAC or CMC, or with the current routing-table contents. A
destination IPv6 address is required. An ICMP echo packet is sent
to the destination IPv6 address on the basis of current routing-
table contents.
To use this subcommand for CMC, you must have the
Administrator privilege.
Synopsis
racadm ping6 <ipv6address>
Example
racadm iping6 198.162.0.2
IPING6 198.162.0.2 (192.168.0.1): 56 data
bytes
64 bytes from 198.162.0.2: icmp_seq=0
ttl=121 time=2.9
ms
--- 198.162.0.2 ping statistics ---
1 packets transmitted, 1 packets received,
0 percent
packet loss
round-trip min/avg/max = 2.9/2.9/2.9 ms
RACADM Subcommand Details 73