CLI Guide

Table 31. Details of getflexaddr (continued)
Synopsis
racadm getflexaddr [-i <slotNum>]
Input -i <slotNum> — Specifies the slot information to be displayed.
<slotNum> must be from 1 to 4.
Table 32. Example
<Slot#> <Status> <Server Presence>
1 Enabled Present
2 Enabled Present
3 Enabled Not Present
4 Enabled Not Present
Table 32. Example
<Fabric> <Type> <Status>
A Gigabit Ethernet Enabled
B None Enabled
C None Enabled
Table 33. FlexAddress setting
<Name> <Type> <Server-Assigned> <Chassis-Assigned>
slot4-idrac Controller 18:A9:9B:FD:C7:57
F8:DB:88:3D:9F:A7(act
ive)
slot4-A 10 GbE KR 00:90:FA:51:36:54
F8:DB:88:3D:9F:A8(act
ive)
10 GbE KR/3 00:90:FA:51:36:55 F8:DB:88:3D:9F:AA(act
ive)
FCoE-WWN 10:00:00:90:FA:51:36:
55
20:01:F8:DB:88:3D:9F:
AA(active)
RACADM Subcommand Details 43