CLI Guide

Table 26. Details of getconfig (continued)
• Saves all group configuration objects from iDRAC to
myrac.cfg.
racadm getconfig -f myrac.cfg
• Displays a list of the available configuration groups on iDRAC in
an alphabetical order.
racadm getconfig -h
• Displays the configuration properties for the user named root.
racadm getconfig -u root
• Displays the user group instance at index 2 with verbose
information for the property values.
racadm getconfig -g cfgUserAdmin -i 2 -v
Table 27. Groups-Key attributes
Groups Key Attributes
cfgEmailAlert cfgEmailAlertAddress
cfgLDAPRoleGroup cfgLDAPRoleGroupDN
cfgServerInfo cfgServerBmcMacAddress
cfgStandardSchema cfgSSADRoleGroupName
cfgTraps cfgTrapsAlertDestIPAddr
cfgUserAdmin cfgUserAdminUserName
getdcinfo
Table 28. Details of getdcinfo
Description Displays general I/O module and daughter card configuration information. Only the CMC controls
daughtercards.
To use this subcommand, you must have the CMC Login User privilege.
NOTE: Fabric verification for server DCs is performed only when the chassis is turned
on. When the chassis is on stand-by power, iDRACs on the server modules remain
turned off and thus are unable to report the server's DC fabric type. The DC fabric
type may not be reported in the CMC user interface until iDRAC on the server is
turned on.
Synopsis
racadm getdcinfo
Input -n — Displays the model names for the daughter cards in servers.
Table 29. Example
<IO#> <Type> <State> <Role>
switch-1 Gigabit Ethernet OK Master
RACADM Subcommand Details 41