CLI Guide

cfgAlertingSourceEmailName
Table 336. Details of cfgAlertingSourceEmailName
Description Specifies the e-mail address used to send e-mail notifications when an event occurs.
Legal Values Valid e-mail address
Default None
Examples
racadm getconfig -g cfgAlerting -o cfgAlertingSourceEmailName
racadm config -g cfgAlerting -o cfgAlertingSourceEmailName user@home.com
Object value modified successfully.
To use this object property, you must have Chassis Configuration Administrator and Test Alert User privileges.
cfgIPv6LanNetworking
This group is used to configure the IPv6 over LAN networking capabilities.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have the Chassis Configuration Administrator privilege.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read/Write)
Table 337. Details of cfgIPv6Enable
Description Enables or disables the IPv6 stack.
Legal Values 1 (TRUE)
0 (FALSE)
Default 0
cfgIPv6AutoConfig (Read/Write)
Table 338. Details of cfgIPv6AutoConfig
Description Enables or disables the IPv6 Auto Configuration option.
NOTE: If this value is set to 0, the CMC disables auto
configuration and statically assigns IPv6 addresses. If
this value is set to 1, the CMC obtains address and route
information using stateless auto configuration and
DHCPv6.
176 CMC Property Database Group and Object Descriptions