CLI Guide

cfgRhostsNtpMaxDist
Table 170. Details of cfgRhostsNtpMaxDist
Description Specifies the NTP maximum distance parameter used to aid in
NTP configuration.
Legal Values 1–128
Default 16
cfgRhostsSyslogPort (Read or Write)
Table 171. Details of cfgRhostsSyslogPort
Description Remote syslog port number to use for writing the RAC and SEL
logs to a remote syslog server.
This setting takes effect only if the cfgRhostsSyslogEnable
parameter is set to 1 (enabled).
Legal Values 10–65535
NOTE: The following port numbers are reserved and
cannot be used: 21, 68, 69, 123, 161, 546, 801, 4096,
5988, 5989, 6900, 9000, 60106.
Default 514
cfgRhostsSyslogEnable (Read or Write)
Table 172. Details of cfgRhostsSyslogEnable
Description Enables or disables remote syslog to allow the RAC and SEL logs
to be written to up to three remote syslog servers.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
cfgRhostsSyslogServer1 (Read or Write)
Table 173. Details of cfgRhostsSyslogServer1
Description Specifies the first of three possible remote syslog servers to store
the RAC and SEL logs. This property is only valid if
cfgRhostsSyslogEnable is set to 1 (enabled).
Legal Values
Valid hostname or IPv4 or IPv6 address.
Default <blank>
130 CMC Property Database Group and Object Descriptions