Users Guide

Managing and Monitoring Power
The PowerEdge VRTX chassis is the most power-efficient modular server enclosure. It is designed to include highly efficient power
supplies and fans, has an optimized layout for the air to flow more easily through the system, and contains power-optimized components
throughout the enclosure. The optimized hardware design is coupled with sophisticated power management capabilities that are built into
the Chassis Management Controller (CMC), power supplies, and iDRAC to allow you to further enhance power-efficient server
environment.
The Power Management features of the PowerEdge VRTX help administrators configure the enclosure to reduce power consumption and
to adjust the power as required specific to the environment.
The PowerEdge VRTX modular enclosure consumes AC power and distributes the load across all active internal power supply units
(PSUs). The system can deliver up to 4800 Watts of AC power that is allocated to server modules and the associated enclosure
infrastructure. However, this capacity varies based on the power redundancy policy that you select.
The PowerEdge VRTX enclosure can be configured for any of the two redundancy policies that affect PSU behavior and determine how
chassis Redundancy state is reported to administrators.
You can also control Power management through OpenManage Power Center (OMPC). When OMPC controls power externally, CMC
continues to maintain:
• Redundancy policy
• Remote power logging
• Dynamic power supply engagement (DPSE)
OMPC then manages:
• Server power
• Server priority
• System Input Power Capacity
• Maximum Power Conservation Mode
NOTE: Actual power delivery is based on configuration and workload.
You can use the CMC web interface or RACADM to manage and configure power controls on CMC:
• View power allocations, consumption, and status for the chassis, servers, and PSUs.
• Configure power budget and redundancy policy for the chassis.
• Execute power control operations (turn on, turn off, system reset, power-cycle) for the chassis.
Topics:
• Redundancy Policies
• Dynamic Power Supply Engagement
• Default Redundancy Configuration
• Power Budgeting For Hardware Modules
• Server Slot Power Priority Settings
• Assigning Priority Levels To Servers
• Assigning Priority Levels To Servers Using CMC Web Interface
• Assigning Priority Levels To Servers Using RACADM
• Viewing Power Consumption Status
• Viewing Power Budget Status Using CMC Web Interface
• Redundancy Status and Overall Power Health
• Configuring power budget and redundancy
• Executing Power Control Operations
• Executing Power Control Operations on a Server
• Executing Power Control Operations for Multiple Servers Using CMC Web Interface
• Executing Power Control Operations on the IOM
14
154 Managing and Monitoring Power