CLI Guide

• Turn off the server from iDRAC when Power is already off on that server.

racadm serveraction powerdown

Server is already powered OFF

• Get Power Status of server 2 on CMC

racadm serveraction -m server-2 powerstatus

• Get Power Status on iDRAC

racadm serveraction powerstatus

Server Power Status: ON

• Reseat server 2 on CMC

$ racadm serveraction -m server-2 reseat -f

Server power operation successful

• Explanation of Support

iDRAC needs to support graceful shutdown

The support of address individual blades is expected on the CMC

set

Table 116. Details of set

Description

Import saved CMC configuration or CMC Event Filter configuration from a file.

NOTE: If CMC is not in the network, you cannot import the chassis configuration profile

from a remote network share with proxy using the set command. But, you can import the

chassis configuration profile from the local management station.

Synopsis

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f

racadm -r <CMC IP> -u <CMC username> -p <CMC password> set -f

<filename> -t xml

racadm set -f <filename> -t xml -u <username> -p <password> -l <CIFS

share>

racadm set -f <filename> -t xml -l <NFS share>

Input

• -f: import CMC configuration or CMC event filter from a file.

• -u: username of the remote share from where the file must be imported.

• -p: password for the remote share from where the file must be imported.

• -l: network share location from where the file must be imported.

• -t: specify the file type to be imported. The valid value is “xml”. This option is case-sensitive.

Example

• Configure event filter configurations from a configuration file using remote racadm

racadm -r 192.168.0.120 -u <username> -p <password> set -f file.txt

96 RACADM Subcommand Details