Manualshelf

CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.21 For Dell PowerEdge VRTX
919293949596979899100
Disable Remote File Started. Please check status using -s option to know Remote File Share is
ENABLED or DISABLED.
• racadm remoteimage -s - status
Remote File Share is Enabled
UserName
Password
ShareName //192.168.0.1/xxxx/dtk_3.3_73_Linux.iso
serveraction
Table 115. Details of serveraction
Description Enables you to perform power management operations on the host system.
To use this subcommand, you must have the Execute Server Control Commands permission.
Synopsis
racadm serveraction <action>
Input • -m <module> -
server-n, where n=1–4
• -a - Performs action on all servers. Not allowed with the powerstatus action.
• -f - Force the action. Required for the reseat action.
• <action>- Specifies the action. The options for the <action> string are:
— graceshutdown — Performs a graceful shutdown of the server. If the operating system on the server
cannot be cleanly shutdown, this operation will not be performed.
— hardreset — Performs a reset (reboot) operation on the managed system.
— powercycle — Issues a power-cycle operation on the managed system. This action is similar to pressing the
power button on the system’s front panel to turn off, and then turn on the system.
— powerdown — Turns off the managed system.
— powerup — Turns on the managed system.
— powerstatus — Displays the current power status of the server (ON or OFF).
— reseat — Performs a virtual reseat of the server. This operation simulates reseating the server by resetting
the iDRAC on a server.
NOTE: The action powerstatus is not allowed with an -a option.
Output Displays an error message if the requested operation fails, or a success message if the operation is completed.
Example • Turn off server 3 from the CMC
racadm serveraction -m server-3 powerdown
Server power operation successful
• Turn off server 3 from iDRAC
racadm serveraction powerdown
Server power operation successful
• Turn off server 3 from CMC when Power is already Off on that server
racadm serveraction -m server-3 powerdown
Server is already powered OFF.
RACADM Subcommand Details 95