CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.21 For Dell PowerEdge VRTX

100

• racadm raid changepolicy:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -wp

{wt|wb} -rp {nra|ra|ara} -dcp {enabled|disabled|default} racadm raid

rename:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -name <VD name>

• racadm raid rename:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -name <VD

name>

• racadm raid ctrlprop:RAID.ChassisIntegrated.1-1 [-rebuild <value>>] [-

bgi <value>] [-reconstruct <value>] [-checkconsistency <value>] [-ccmode

{abortonerror | normal}] [-copybackmode {off | on | onwithsmart}] [-lb

{auto | disabled}] [-prunconfigured {yes | no}]

• racadm raid

rebuild:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

• racadm raid

cancelrebuild:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1

-1

• racadm raid disableperc:RAID.ChassisIntegrated.2-1

• racadm raid enableperc:RAID.ChassisIntegrated.2-1

• racadm raid createsecuritykey:RAID.ChassisIntegrated.1-1 -key <Key id> -

passwd <passphrase>

• racadm raid modifysecuritykey:RAID.ChassisIntegrated.1-1 -key <Key id> -

oldpasswd <oldpassphrase> -newpasswd <newpassphrase>

• racadm raid deletesecuritykey:RAID.ChassisIntegrated.1-1

• racadm raid encryptvd:Disk.Virtual.0:RAID.ChassisIntegrated.1-1

• racadm raid

cryptographicerase:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegra

ted.1-1

• racadm raid unlock:RAID.ChassisIntegrated.1-1 -key <Key id> -passwd

rebuild

Table 104. Details of rebuild

Description

Starts a rebuild on a specified virtual drive.

Synopsis

racadm raid rebuild:<PQ FQDD> {-current | -pending}

Input

• –current <optional>: Performs the configuration.

NOTE: If this requires the system to restart, the system is restarted.

• –pending: Save the configuration change for a later use. You can use a combination of the –pending and –

current flags on multiple commands to reduce the possible number of system restarts.

Example

racadm raid

rebuild:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1

resetconfig

Table 105. Details of resetconfig

Description

Removes the current RAID Configuration (Virtual Drives and Hotspares) from the RAID controller. This operation is

not data-destructive, but is difficult to reverse.

Synopsis

racadm raid resetconfig:<Controller FQDD> {-current|pending}

Input

• –current <optional>: Performs the configuration right now.

RACADM Subcommand Details 91