CLI Guide

• Monitor and Inventory all Controllers connected to the server.

racadm raid get controllers

racadm raid get controllers -o

This command is an optimized version and displays the full controller objects along with their keys.

racadm raid get controllers -o -p <property names separated by comma>

This command displays the filtered property values for all returned controller objects.

• Monitor and Inventory all batteries connected to the controller

racadm raid get batteries --refkey <controller FQDDs

separated by comma>

This command displays all battery keys connected to the controllers referred to as refkeys.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o

This command is an optimized version and displays all battery objects for the controller FQDD.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o -p <property names separated by comma>

This command is an optimized and filtered version.

racadm raid get batteries --refkey <controller FQDDs

separated by comma > -o -p <property names separated by comma>

• Monitor and Inventory all virtual disks connected to the controller

racadm raid get vdisks --refkey <controller FQDDs

separated by comma>

This command displays all vdisk keys connected to the controllers being mentioned as refkeys.

racadm raid get vdisks --refkey <controller FQDDs

separated by comma > -o

This command is an optimized version and displays all vdisk objects for the controller FQDD.

racadm raid get vdisks

racadm raid get vdisks --refkey RAID.ChassisSlot.5-1 -o -p status

racadm Disk.Virtual.5:RAID.ChassisSlot.5-1

Status = Ok

racadm Disk.Virtual.0:RAID.ChassisSlot.5-1

Status = Ok

racadm Disk.Virtual.1:RAID.ChassisSlot.5-1

Status = Ok

racadm Disk.Virtual.2:RAID.ChassisSlot.5-1

Status = Ok

• Monitor and Inventory all storage enclosures connected to the controller

racadm raid get enclosures --refkey <controller FQDDs

separated by comma>

RACADM Subcommand Details