CLI Guide

ping6

Table 79. Details of ping6

Description Verifies that the destination IPv6 address is reachable from an

iDRAC or CMC, or with the current routing-table contents. A

destination IPv6 address is required. An ICMP echo packet is sent

to the destination IPv6 address on the basis of current routing-

table contents.

To use this subcommand for CMC, you must have the

Administrator privilege.

Synopsis

racadm ping6 <ipv6address>

Example

racadm iping6 198.162.0.2

IPING6 198.162.0.2 (192.168.0.1): 56 data

bytes

64 bytes from 198.162.0.2: icmp_seq=0

ttl=121 time=2.9

--- 198.162.0.2 ping statistics ---

1 packets transmitted, 1 packets received,

0 percent

packet loss

round-trip min/avg/max = 2.9/2.9/2.9 ms

racdump

Table 80. Details of racdump

Description This subcommand displays the comprehensive chassis status and

configuration state information, and historic event logs. Used for

post-deployment configuration verification and during debugging

sessions.

To use this subcommand for CMC, you must have the

Administrator privilege.

Synopsis

racadm racdump

Input Racdump includes the following subsystems and aggregates the

following RACADM commands:

• General System/RAC information - getsysinfo

• Session information - getssinfo

• Sensor information - getsensorinfo

• Switches information (IO Module) - getioinfo

• Mezzanine card information (Daughter card) - getdcinfo

• All modules information - getmodinfo

70 RACADM Subcommand Details