CLI Guide

Output The default output display shows the record number, timestamp, source, and description. The timestamp begins at

midnight, January 1 and increases until the system boots. After the system boots, the system’s timestamp is used.

Example

Record: 1

Date/Time: Dec 8 08:21:30

Source: ssnmgrd[175]

Description: root from 143.166.157.103: session timeout

sid 0be0aef4

getversion

Table 72. getversion

Description

Displays the current firmware version of various modules in the chassis, iDRAC version on the attached servers,

and whether the target device can be updated.

NOTE: To use this subcommand, you must have CMC Login User privilege.

Synopsis

• racadm getversion

• racadm getversion [-b | -c] [-m <module>]

• racadm getversion -l [-m <module>] [-f <filter>]

Input

NOTE: The -b, -c and -l options are not available for CMC modules.

NOTE: The -l option requires that the Lifecycle Controller service is enabled on the servers. For

version information, see the RACADM Readme available at dell.com/support/manuals.

• (none) — Displays the version information for all targets or devices.

server-3 2.20.20.20 (41) PowerEdge M630

(VRTX) iDRAC8 Y

<Switch> <Model Name> <HW Version> <FW

Version>

switch-1 R1-PT VRTX 1Gb Pass-through

A00 1.0.0.8

cmc-1 3.00.000.201609223282 Y

62 RACADM Subcommand Details