CLI Guide

Example
racadm getredundancymode
Redundant
getsel
Table 57. Details of getsel
Description Displays all sensor event log entries in the DRAC.
Synopsis • racadm getsel -i [-A]
• racadm getsel [-s <start>] [-c <count>] [-A] [-o] [-E] [-R] [--more]
If no arguments are specified, the entire log is displayed.
Input • -A — Specifies output with no display headers or labels.
• -c — Provides the number of records to be displayed.
• -o — Displays each entry in the SEL in a single line.
• -s — Specifies the starting record used for the display.
• -E — Displays RAW SEL data with the other data for each entry.
• -R — Displays only RAW SEL data for each entry.
• -i — Displays the number of entries in the SEL.
• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more
command.)
NOTE: The -A, -E, -o, and -R options are deprecated.
Output
Record: 12
Date/Time: 11/20/2011 14:19:34
Source: system
Severity: Ok
Description: C: boot completed.
Example
racadm getsel
getsensorinfo
Table 58. Details of getsensorinfo
Description
Displays status of chassis sensors.
NOTE: To use this subcommand, you must have CMC Login User privilege.
Synopsis
racadm getsensorinfo
racadm getsensorinfo -c
56 RACADM Subcommand Details