CLI Guide

ManualsBrandsDell ManualsActive System ManagerChassis Management Controller Version 3.21 For Dell PowerEdge VRTX

[-q <sequence no.>] [-n <number of records>] [-r <start timestamp>]

[-e <end timestamp>]

Input

• -i — Displays the number of records present in the active log. You cannot use this option with any

other option.

• -c — The log type to filter the records. Provide multiple categories using a "," as the delimiter. The

value is case-insensitive. Valid Category values:

• All

• System

• Storage

• Updates

• Audit

• Config

• -q - The sequence number from which the records must be displayed.

• -n - Specifies the n Number of records to be displayed.

• -r - Displays events that have occurred after this time. The time format is yyyy-mm-dd HH:MM:SS.

The time stamp must be provided within double quotes.

• -e - Displays events that have occurred before this time. The time format is yyyy-mm-dd

HH:MM:SS. The time stamp must be provided within double quotes.

• -f <filename> - Specifies the file location and name where the chassis log is exported.

• -a <name> - Specifies the FTP Server IP address or FQDN, user name, and password.

• -d <path> - Specifies the path to the file on the FTP server.

• -l <location> - Specifies the location of the network share or area on file system where chassis log is

exported. Two types of network shares are supported:

— SMB mounted path: //<ipaddress or domain name>/<share_name>/<path_to_image>

— NFS mounted path: <ipaddress>:/<path_to_image>.

• -u <user> — Specifies the user name for accessing the FTP Server, or Domain and User Name for

accessing network share location.

• -p <password> — Specifies the password for accessing the FTP Server or Share location.

• -s — Filters records based on severity. Provide multiple severities using a comma (,) as the

delimiter. The values are not case-sensitive. The valid severity values are:

• 1. Warning

• 2. Critical

• 3. Info

• -b — The subcategory used to filter the records. Provide multiple subcategories using a comma (,)

as the delimiter. The values are not case-sensitive. The valid subcategories are:

• CPUA: Proc Absent

• MEM: Memory

• UEFI: UEFI Event

• FC: Fiber Channel

• ENC: Storage Enclosure

• SYS: System Info

• LNK: Link Status

• BAT: Battery Event

• RSI: Remote Service

• OSE: OS Event

• VRM: Virtual Console

• PSU: Power Supply

• Log: Log event

• RDU: Redundancy

• FCD: Feature Card

• CMC: Chassis Management Controller

• CTL: Storage Controller

• CPU: Processor

RACADM Subcommand Details