CLI Guide

cfgServerInfo
For iDRAC this group allows you to select the BIOS first boot device and provides the option to boot the selected device only once.
For CMC, this group allows you to displays information for and configure a server in the chassis.
Use this object with the config or getconfig subcommands.
To use this object property for CMC, you must have Chassis Configuration Administrator privilege.
NOTE: For CMC, you can configure any setting that is not preceded by the hash sign (#) in the output. To modify a
configurable object, use the -o option
The following sections provide information about the objects in the cfgServerInfo group.
cfgServerInfoIndex (Read Only)
Table 229. Details of cfgServerInfoIndex
Description Displays the index name of the server.
Legal Values None
Default None
cfgServerSlotNumber (Read Only)
Table 230. Details of cfgServerSlotNumber
Description Specifies the location of the specified server (1–4) in the chassis.
Legal Values None
Default None
cfgServerServiceTag (Read Only)
Table 231. Details of cfgServerServiceTag
Description Displays the service tag of the specified server.
Legal Values None
Default None
cfgServerName (Read/Write)
Table 232. Details of cfgServerName
Description Displays the name of the specified server.
Legal Values Maximum of 15 non-extended ASCII characters, (ASCII codes 32–126). For more information, see
Guidelines to Quote Strings Containing Special Characters when Using RACADM Commands.
Default SLOT - <slot number>
140 CMC Property Database Group and Object Descriptions