CLI Guide

cfgSerialTelnetEnable (Read/Write)
Table 198. Details of cfgSerialTelnetEnable
Description Enables or disables the Telnet console interface on CMC.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
cfgOobSnmp
This group contains parameters to configure the SNMP agent and trap capabilities of CMC. One instance of the group is allowed.
The CMC SNMP agent supports the standard RFC1213 mib-2, and the Dell enterprise-specific MIB.
Use this object with the config or getconfig subcommands.
To use this object property, you must have Chassis Configuration Administrator privilege.
NOTE: You can configure any setting that is not preceded by the hash sign (#) in the output. To modify a configurable
object, use the -o option.
The following sections provide information about the objects in the cfgOobSnmp group.
cfgOobSnmpAgentCommunity (Read/Write)
Table 199. Details of cfgOobSnmpAgentCommunity
Description Specifies the SNMP Community Name (identical to community
string) used for SNMP traps. The community string acts as a
password shared between different hosts over the network. This
community string value must match with that of the other hosts
for any kind of communication through SNMP.
Legal Values A string of up to 31 characters.
Default public
Example
racadm getconfig -g cfgOobSnmp
# racadm getconfig -g cfgoobsnmp
cfgOobSnmpAgentEnable=1
cfgOobSnmpAgentCommunity=public
cfgOobSnmpProtocol=ALL
cfgOobSnmpTrapFormat=SNMPv1
cfgOobSnmpAgentEnable (Read/Write)
Table 200. Details of cfgOobSnmpAgentEnable
Description Enables or disables the SNMP agent.
Legal Values • 1 (TRUE)
• 0 (FALSE)
Default 0
132 CMC Property Database Group and Object Descriptions